FMS Fox 800mm
800mm FMS Fox glider - Plug N Play (PNP) - FMS068
If you are looking for an easy to fly and affordable introduction to the exciting world of Radio Controlled flight then the 800mm FOX is the aircraft for you. Enjoy the thrill of R/C model flying with this Ready-To-Fly 800mm FOX. In a matter of minutes you can be ready to take off as all electronics are pre-installed at the factory and adjusted for ease of use. The 800mm FOX is the ideal choice for beginners. Pleasing on the eye, its gentle and forgiving flight characteristics are perfect for pilots to enjoy flying, while coming to terms with a completely new experience. All you need is a 4 channel radio, 4 channel receiver and 2 Cell 350 mAh LiPo battery to get started!
FEATURES:
- 3900kV motor to pull the glider to altitude for gliding
- Folding prop
- Simple build process
- Inlet and exit air holes for proper cooling
- Spars and EPO foam construction provide the perfect balance between strength and flexibility
- Outrunner motor, servos, and ESC come pre-installed for your convenience
REQUIRES:
- Minimum 4 Channel Radio
- 4 Channel Receiver
- 2 Cell 7.4V 350 mAh LiPo Battery with JST
- Lipo Battery Charger
PRODUCT SPECIFICATIONS:
|
Wingspan |
800mm / 31.5in |
|
Length |
N/A |
|
Flying Weight |
627g / 1.38lb |
| CG (Center of Gravity) | 53-58mm from leading edge |
|
Power System |
1811-3900kV Brushless Outrunner Motor |
|
Electronic Speed Control |
6A ESC, JST Connector |
|
Propeller / EDF |
9x5 2 Blade folding prop |
|
Servos |
9g analog standard, rudder |
| Landing Gear | Single tire |
|
Required Battery |
2S 7.4V 350 mAh LiPo w/JST |
|
Required Radio |
4 Channel (required) |
| Ailerons | Yes |
|
Elevator |
Yes |
| Rudder | No |
|
Flaps |
No |
|
Lights |
No |
|
Hinge Type |
Foam hinges |
| Material | EPO Foam |
| Skill Level | Intermediate |
| Build Time | 1 Hour |
| Recommended Environment | Outdoor |